Jalandhar
The basic operation principle on which the Single-Phase Transformer works is that the AC voltage source injects the AC current
AC current all the way through the primary transformer winding.
It is designed by keeping in mind the technicalities with its present ability and affordability. In the non-urban areas where electrical demands are comparatively lower than cities utilities, single phase transformers serve all the purposes and fulfil all their requirements.
The Single-Phase Transformer contains two windings, one on essential and the other on the optional side. They are for most non-urban areas where single-phase electrical power is utilized. It comes with dual inward and outward coils known as primary and secondary coils respectively, which work at different voltages. The winding is around the hard iron core which works to prevent excess loss of energy during conduction,
thus making our product very energy efficient. Our decades of knowledge and excellence in the study and development of transformers has given us the command on this technology and upcoming developments as well. The primary coil works to change the incoming electric current into magnetic fields which pass through the core and the secondary coil works here to get that high voltage alternating magnetic field into electric current and supply it as per the required voltage. Our Single-phase power transformers are always preferred under smaller loads instead of three-phase power transformer due to its cost efficiency and less dependability on the extreme need of power.
Our Single-Phase Transformers have been designed to serve the function of both the step-up transformer and step-down transformer.
We offer an inclusive range of single-phase transformers. The ratings of our transformers range up to 16-150kVA which makes it a suitable option for heavy usage. The voltage class that is usually required is 6.35, 11, 15, 20, 33 kV, besides these other ranges will be available as per the requirements. We manufacture our transformers under the applicable standards of IS 1180, IS 2026, IEC 60076. We tend to provide the indoor and outdoor services depending upon the needs. The average frequency of 50Hz is used. The winding material used is copper or aluminium. Our transformers are developed with modern technologies and can be provided with different terminations.
Plot No. 34, Bulandpur Road, Gadaipur, Back side Focal Point Jalandhar-144004 (Punjab)